{{tag>shell utils network time sync debian ubuntu ntpdate}}

====== Синхронизация времени (time sync) ======

===== Debian =====


Точное время необходимо для правильной работы системы, поэтому займемся первым делом этим вопросом. Установим пакет ntpdate

<code bash>$ apt-get install ntpdate</code>
  
Сверим время с сервером точного времени

<code bash>$ ntpdate-debian</code>
  
При необходимости произведем смену часового пояса через

<code bash>$ tzconfig или dpkg-reconfigure tzdata (для поздних релизов)</code>
  
тут все по русски, выбираем необходимое. Теперь отключаем контроль разницы во времени БИОС и системы по местному времени, дело в том, что по умолчанию система считает, что время БИОС это точное международное время по Гринвичу и система должна корректировать свое время по местной разнице исходя от него, оставляя время БИОС без корректировки.
Если мы хотим соответствия времени системы со временем БИОС, то заходим в

/etc/default/rcS заменяем UTC=yes на UTC=no и выполняем
<code bash>$ /etc/init.d/hwclock.sh restart</code>
  
перезапускаем сервер времени. Если у вас платформа amd64, то ваши часы наверняка убегают вперед, это происходит потому что по умолчанию работает таймер tsc, а нам нужен hpet, ибо tsc ведет себя таким вот безобразным образом в системах amd64. Как быть?

Отключаем таймер tsc, а так как система не может без таймера, то она запустит следующий свободный hpet.
Для этого необходимо передать ядру параметр notsc, его следует прописать в файле /boot/grub/menu.lst в строке с kernel в конце после уже прописанных параметров через пробел от последнего, сохранить и перезагрузить систему.

Для синхронизации времени с интернет сервером необходимо установить

<code bash>$ apt-get install ntp</code>

===== Ubuntu =====

<code bash>$ apt install ntpdate</code>

<code bash>$ timedatectl set-timezone Europe/Moscow</code>

<code bash>$ ntpdate -u pool.ntp.org</code>

cat /etc/ntp.conf
<code >
# /etc/ntp.conf, configuration for ntpd; see ntp.conf(5) for help

driftfile /var/lib/ntp/ntp.drift

# Leap seconds definition provided by tzdata
leapfile /usr/share/zoneinfo/leap-seconds.list

# Enable this if you want statistics to be logged.
#statsdir /var/log/ntpstats/

statistics loopstats peerstats clockstats
filegen loopstats file loopstats type day enable
filegen peerstats file peerstats type day enable
filegen clockstats file clockstats type day enable


# You do need to talk to an NTP server or two (or three).
#server ntp.your-provider.example

# pool.ntp.org maps to about 1000 low-stratum NTP servers.  Your server will
# pick a different set every time it starts up.  Please consider joining the
# pool: <http://www.pool.ntp.org/join.html>
pool 0.debian.pool.ntp.org iburst
pool 1.debian.pool.ntp.org iburst
pool 2.debian.pool.ntp.org iburst
pool 3.debian.pool.ntp.org iburst


# Access control configuration; see /usr/share/doc/ntp-doc/html/accopt.html for
# details.  The web page <http://support.ntp.org/bin/view/Support/AccessRestrictions>
# might also be helpful.
#
# Note that "restrict" applies to both servers and clients, so a configuration
# that might be intended to block requests from certain clients could also end
# up blocking replies from your own upstream servers.

# By default, exchange time with everybody, but don't allow configuration.
restrict -4 default kod notrap nomodify nopeer noquery limited
restrict -6 default kod notrap nomodify nopeer noquery limited

# Local users may interrogate the ntp server more closely.
restrict 127.0.0.1
restrict ::1

# Needed for adding pool entries
restrict source notrap nomodify noquery

# Clients from this (example!) subnet have unlimited access, but only if
# cryptographically authenticated.
#restrict 192.168.123.0 mask 255.255.255.0 notrust


# If you want to provide time to your local subnet, change the next line.
# (Again, the address is an example only.)
#broadcast 192.168.123.255

# If you want to listen to time broadcasts on your local subnet, de-comment the
# next lines.  Please do this only if you trust everybody on the network!
#disable auth
#broadcastclient

</code>