✎ ifconfig

Вы загрузили старую версию документа! Сохранив её, вы создадите новую текущую версию с этим содержимым.

====== ifconfig ======

===== Статический IP =====

==== Console ====

* ifconfig eth0 down
  * ifconfig eth0 inet [IP]
  * ifconfig eth0 netmask [MASK]
  * route add [GW] gw [IP]
  * ifconfig eth0 up

==== Scripts ====

**nano /etc/network/interfaces**

===== DHCP =====

==== Scripts ====

**nano /etc/network/interfaces**

<code>
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
allow-hotplug eth0
iface eth0 inet dhcp
</code>

==== Eror: bash: ifconfig: command not found ====

The ifconfig command has been deprecated and thus missing by default on Debian Linux, starting from Debian stretch.

<code bash>
# ifconfig
-bash: ifconfig: command not found
</code>

The new and recommended alternative for examining a network configuration on Debian Linux is ip command. For example to use ip command to display a network configuration run the following:

<code>
# ip address
</code>

The above ip command can be abbreviated to:

If you still prefer to use ifconfig as part of your daily sys admin routine, you can easily install it as part of the **net-tools** package.

Сводка изменений

Примечание: редактируя эту страницу, вы соглашаетесь на использование своего вклада на условиях следующей лицензии: CC0 1.0 Universal