Различия

Показаны различия между двумя версиями страницы.

Ссылка на это сравнение

Предыдущая версия справа и слева Предыдущая версия
ntpdate [2024/02/08 21:09] – mirocowntpdate [2024/02/08 21:21] (текущий) – [Ubuntu] mirocow
Строка 42: Строка 42:
  
 cat /etc/ntp.conf cat /etc/ntp.conf
-<code ></code>+<code > 
 +# /etc/ntp.conf, configuration for ntpd; see ntp.conf(5) for help 
 + 
 +driftfile /var/lib/ntp/ntp.drift 
 + 
 +# Leap seconds definition provided by tzdata 
 +leapfile /usr/share/zoneinfo/leap-seconds.list 
 + 
 +# Enable this if you want statistics to be logged. 
 +#statsdir /var/log/ntpstats/ 
 + 
 +statistics loopstats peerstats clockstats 
 +filegen loopstats file loopstats type day enable 
 +filegen peerstats file peerstats type day enable 
 +filegen clockstats file clockstats type day enable 
 + 
 + 
 +# You do need to talk to an NTP server or two (or three). 
 +#server ntp.your-provider.example 
 + 
 +# pool.ntp.org maps to about 1000 low-stratum NTP servers.  Your server will 
 +# pick a different set every time it starts up.  Please consider joining the 
 +# pool: <http://www.pool.ntp.org/join.html> 
 +pool 0.debian.pool.ntp.org iburst 
 +pool 1.debian.pool.ntp.org iburst 
 +pool 2.debian.pool.ntp.org iburst 
 +pool 3.debian.pool.ntp.org iburst 
 + 
 + 
 +# Access control configuration; see /usr/share/doc/ntp-doc/html/accopt.html for 
 +# details.  The web page <http://support.ntp.org/bin/view/Support/AccessRestrictions> 
 +# might also be helpful. 
 +# 
 +# Note that "restrict" applies to both servers and clients, so a configuration 
 +# that might be intended to block requests from certain clients could also end 
 +# up blocking replies from your own upstream servers. 
 + 
 +# By default, exchange time with everybody, but don't allow configuration. 
 +restrict -4 default kod notrap nomodify nopeer noquery limited 
 +restrict -6 default kod notrap nomodify nopeer noquery limited 
 + 
 +# Local users may interrogate the ntp server more closely. 
 +restrict 127.0.0.1 
 +restrict ::1 
 + 
 +# Needed for adding pool entries 
 +restrict source notrap nomodify noquery 
 + 
 +# Clients from this (example!) subnet have unlimited access, but only if 
 +# cryptographically authenticated. 
 +#restrict 192.168.123.0 mask 255.255.255.0 notrust 
 + 
 + 
 +# If you want to provide time to your local subnet, change the next line. 
 +# (Again, the address is an example only.) 
 +#broadcast 192.168.123.255 
 + 
 +# If you want to listen to time broadcasts on your local subnet, de-comment the 
 +# next lines.  Please do this only if you trust everybody on the network! 
 +#disable auth 
 +#broadcastclient 
 + 
 +</code>